新闻banner
Current location : HOME >> News >> Company News

Gas-liquid booster cylinder three stages of the working process

2021-09-11

Today, gas-liquid booster cylinder manufacturers xiaobian to introduce you to the three-stage working process

A. Pneumatic piston rod drives the force part to contact the workpiece quickly and with small force - "soft in place" technology

B. The force stroke of the gas-liquid booster cylinder is at any position within the total stroke range, and the force part is in contact with the workpiece, that is, the automatic starting stroke is used for full force stamping - "self-adaptation of the booster"

C. Pneumatic return stroke.


● In the process of work, the automatic driving stroke greatly ensures the working process without impact vibration, low noise, effectively improve the workpiece processing quality and force part of the whole life.

● Simple and reliable control as control of a common cylinder, by a two five-way valve can achieve all the control, such as stroke switch control stroke and fast process or different pressure control stroke can be achieved.

● The speed of three-stage working stroke and the size of the force and stroke in the specified range can be stepless adjustment and PLC control.

● Large multiple of the pressurization ratio to ensure that the gas-liquid booster cylinder in the same tonnage of cylinder, hydraulic cylinder diameter is the smallest, the required installation space is the smallest.

● Compared with the same tonnage cylinder or hydraulic system or other institutions, the energy consumption is very low and the action frequency is high. Some models can be 125 times/min.

● All imported high quality sealing ring allows the use of no lubrication compressed air, clever design structure completely prevent compressed air into the oil chamber.


PG电子(中国)官方网站

● Each booster cylinder is equipped with a high pressure measuring interface to facilitate the following operations:

A. Connect the pressure gauge.

B. Connect pressure relay to set pressure increase not affected by compressed air, and return automatically after reaching preset pressure.

C. Realize other functions required by users.


标签

本文网址:/en/news/445.html

Recently Viewed: